1. Example project
The simple PROFINET configuration example is using the SET_CONFIGURATION_REQ packet without an indication handling
The extended PROFINET configuration example is using the SET_CONFIGURATION_REQ packet with an indication handling for ParameterEnd and Records. It uses the Register Application service.
Using the Register Application Service, the user application provides the stack an endpoint to send indications to.
The SimpleConfig example does not use the example above, this only applies to the extendedConfig example.
The SimpleConfig example can be found in the Knowledge Base on the following website:
netX 90: https://kb.hilscher.com/display/NXLFWHST/netX+90+-+PROFINET+IO+Device+-+Examples
netX 51: https://kb.hilscher.com/display/NXLFWHST/netX+51+-+PROFINET+IO+Device+-+Examples
This can alternatively be found under:
kb.hilscher.com → Software → LFW Host Examples → Profinet IO-Device → netX 90 APP / netX 51 → PROFINET IO Device - simpleConfig Vx.x.x.x
The SimpleConfig project can be opened by double-clicking the ".solproject" file. This requires the latest version of netXStudio (https://kb.hilscher.com/display/NDT).