...
sends a Alarm disappears to the controller.
9. TIA Portal
In the codefor add diagnostic request the value ErrType can be changed to show diffented diagnostics.
ptReq->tData.usChannelErrType = 0x100; is the diagnostic defined in the GSDML file.
ptReq->tData.usChannelErrType = 0x2; is a standard definition for undervoltage
Go online and connect to device. Click on the Device and go to the 10 Byte input. Open the Online Diagnosis.
Switch to diagnose status
hange change DIP S700.3 to on and add the diagnosis on the Device. No the test Fehler = error comes
10. Sycon
Here a netHost with Sycon is used. Connect to the nethost and than open Diagnsis of the Profinet IO Controler
...