...
- The Diagnosis shows geneal informations about the current communication
- This is how the diagnosis should look like, in case of a working communication to a Profinet IO Controller:
- the The field "Communication error", gives information about the current communication state.
All Error Codes can be found in the following document: https://kb.hilscher.com/display/DL/Hilscher+status+and+error+codes
Diagnostic Tools
Packet Monitor
The Packet Monitor is used to send and receive acyclic datapackets.
IO Monitor
The IO Monitor is used to send and receive IO Data, to check the current communication.
It does only work, if a communication is already successfully established.
To send data to the IO Controller, enter the output data to be sent into the "Output Data" area and click "Update".
At the opposite device, the corresponding data is being received now.
The Field "Input data", shows the data sent by the IO Controller to the IO Device.
