...
For this document a network with two slaves was chosen:
If you now do a network scan. Right click on the cifx card → "Network Scan..." it will look like this:
The first slave is the Baumer Encoder and the second slave is the netTAP 151, as expected.
If you were to switch the IN and OUT connection on the Baumer Encoder a scan will look like:
If you pay enough attention you will already see the mismatching topology now.
If this isn´t noticed or if the network is build incorrectly by hand the error: 0xC0CD0043 "Topology error detected" will be shown:
Slave
Title 3 provides an entry in the table of contents as x.1 + n.1 + m
...