...
Changing card slots can work to a limited extent.
In general there are 4 legacy interrupt lines (A / B / C / D), which are alternately assigned to the PCI devices and also to the PCI slot on a main board.
There is then a mapping matrix on the hardware for these general lines, where an interrupt number is assigned to these lines.
...
Of course, this only works insofar as if the devices that are need to be deactivated are not required by the system.
In this example you could try to deactivate the "Intel Active Management" device could be deactivated.
But it can then also Nevertheless, it could happen that the next time the system is started, the system it reconfigures another device in such a way, that there is interrupt sharing again.
...