...
The signal mapping is used to define how the IO data of the two ports X2 and X3 are to should be assigned to each other or how the data is to should be transferred from one protocol language to another.
This process is part of the gateway configuration in Sycon.net.
This is illustrated by the following representation:
...
By marking the port (e.g., X2), all available I/O data is displayed underneathbelow. By clicking on a specific module, only the data of the selected module will be displayed.
...
These can only be changed using "Available Signals" again, if the mapping is has been removed via "remove link".
...
By using automapping, port X3 is mirrored to X2, or X2 to X3.
This can lead to unwanted configuration changes and, as a result, further communication issues.
...