| Section | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Technical Data
| Feature | Description |
|---|---|
| Maximum number of total cyclic input data | 1440 bytes |
| Maximum number of total cyclic output data | 1440 bytes |
| Maximum number of submodules | 32 submodules in total |
| Multiple Application Relations (AR) | The Stack can handle up to 4 IO-ARs and one Supervisor-DA AR at the same time. |
| Acyclic communication | Read/Write Record, max. 1024 Bytes/Telegram for standard firmware. |
| Alarm Types | Process Alarm, Diagnostic Alarm, Return of Submodule Alarm (implicit), Plug Alarm (implicit), Pull Alarm (implicit) |
| Diagnosis Entries | The stack supports up to 256 application diagnosis records of type Channel or Extended Channel Diagnosis |
| Identification & Maintenance | I&M0-4 Read/Write: Either built in for Slot 0/Subslot 1 or pass through to application for any submodule. |
| Topology recognition | LLDP, SNMP V1, MIB2, physical device |
Minimum cycle time | 1 ms for RT 250µs for IRT |
| IRT Support | supported (RT_CLASS_3) |
Media Redundancy | MRP client is supported |
| Additional supported features | DCP, VLAN- and priority tagging, Shared Device |
| Baud rate | 100 MBit/s |
Data transport layer | Ethernet II, IEEE 802.3 |
| Profinet IO specification | V2.3 (advanced startup) is implemented V2.2 (legacy startup) is supported Maximum supported GSDML Parameter PNIO_Version: 2.35 (when using newest available stack/firmware version) |
Configuration
Configuration is done by sending packets to the stack or by using SYCON.net configuration database.
...
Some elementary diagnosis information can be read using the service “Get Diagnosis Service”. This service might be extended in future.
...