...
| Feature | Description |
|---|---|
| Maximum number of total cyclic input data | 1440 bytes |
| Maximum number of total cyclic output data | 1440 bytes |
| Maximum number of submodules | 64 submodules in total |
| Multiple Application Relations (AR) | The Stack can handle up to 2 IO-ARs, one Supervisor AR and one Supervisor-DA AR at the same time. |
| Acyclic communication | Read/Write Record, max. 1024 Bytes/Telegram for standard firmware. |
| Alarm Types | Process Alarm, Diagnostic Alarm, Return of Submodule Alarm (implicit), Plug Alarm (implicit), Pull Alarm (implicit) |
| Diagnosis Entries | The stack supports up to 256 application diagnosis records of type Channel or Extended Channel Diagnosis |
| Identification & MaintenanceReading and writing of | I& M1M0-4 . If(if the stack is configured to handle I&M by itself (this is the default) the GSDML device description shall be adapted to indicate the support of I&M1-4)Read/Write: Either built in for Slot 0/Subslot 1 or pass through to application for any submodule. |
| Topology recognition | LLDP, SNMP V1, MIB2, physical device |
Minimum cycle time | 1 ms for RT (all chip types) |
| IRT Support | not supported |
Media Redundancy | MRP client is supported |
| Additional supported features | DCP, VLAN- and priority tagging, Shared Device |
| Baud rate | 100 MBit/s |
Data transport layer | Ethernet II, IEEE 802.3 |
| Profinet IO specification | V2.3 (advanced startup) is implemented V2.2 (legacy startup) is supported |
...