Due to the module’s preconfiguration specific knowledge about network commissioning is not required. Just use the provided device description files for it and focus on your application and the PLC programming. The module demonstrates the capabilities of Hilscher’s Network Controller netX in a very simple manner. Since the netX API remains the same independent of the loaded protocol firmware an application needs to be programmed only once and hence supports any Real-Time Ethernet network. Parameters | Value |
---|
Processor/Network Controller | netX 52 | Memory | 4 MB Quad SPI Flash | Communication interface | 2 x Ethernet 100 BASE-TX | Host interface | SPI up to 125 MHz | Displays | System-LED COM LED for protocol-specific diagnosis | Operating temperature | 0 ... + 50 °C | Operating voltage | +5 V / typ 300 mA | Dimensions (L x W x H) | 65 x 57 x 20 mm | CE marking | yes | RoHS compliant | yes | Compatible with | Raspberry Pi®4, 3, PI®2, Zero® | Module standard | HAT standard for RaspberryPi® |
Note |
---|
| This product serves for test- and education- / teaching purposes for industrial applications and controls. Every liability is excluded with industrial use. |
|