These Flashes are Supported by the netX romloader, 2ndStageLoader and rcX.
| Manufacturer | Device | Type | Size | Frequency | Housing | Comments |
|---|---|---|---|---|---|---|
| Adesto | AT45DB321E | SPI | 4 MB | 85MHz | 8P/SOIC,8P/DFN,8P/UBGA | |
 Macronix | MX25L3235E MX25L3235E | SPI/(QSPI not yet tested) | 4MB | |||
| MX25L12835F | MX25L12835F | SPI/(QSPI not yet tested) | 16MB | 16P/SOP | MX25L12835FMI-10G tested with NXHX51ETM with 1bit SPI, BSL V1.4.17.0 with custom flash parameters set in tag list identical to MX25L3235E except "Chip size=0x01000000" and "ID compare=00 C2 20 18 00 00 00 00 00"; and with EIM2.6.7.1 | |
| STMicroelektronics | M25PE80 | SPI | 1 MB | |||
| M45PE40 | SPI | 512 KB | ||||
| M45PE80 | SPI | 1 MB | ||||
| Winbond | W25Q32B | QSPI | 4 MB | 50MHz | 8P/PDP, 8P/SOIC, 8PWSON |
...
If Standard netX 52 Firmware from Hilscher is used, we need the Winbond QSPI Flash.
is working only with patched 2nd Stage Loader and adapted firmware