Panel

bgColor	#FFFFFF
titleBGColor	lightgrey
title	Release Notes

Page Properties

Status

colour	Green
title	RELEASED

Date

2021-03-01

Version

V1.0500.201127.35275 (DVD 2021-03-1)

Summary

Introduction of EIS V3.6.x.x firmware as EIS V2.14.x.x replacement

Introduction of PNS V4.5.x.x firmware as PNS V3.14.x.x replacement

New comX 52 for PROFIBUS DP Slave, DeviceNet Slave and CANopen Slave as compatible comX 10 replacement.

New Loadable Firmware Host examples

New Application Notes in our Global Support space

Note: We reserve the right to make technical changes without prior notice.

Panel

bgColor	#FFFFFF
titleBGColor	lightgrey
title	Phase Out Information

PNS V3 & EIS V2 phase out

Due to development consolidation and efficiency improvements, we will phase out PROFINET IO-Device generation V3 and EthernetIP Adapter generation V2 by end of 2021.
Means by this date no features will be added anymore and there will be no support of latest test bundles for certification.

Replacement will be PROFINET IO-Device generation V4 and EthernetIP Adapter generation V3, which are available in this package.
We strongly recommend always using the latest firmware versions, to have full feature support and to stay compliant with latest test bundles for certification.

Please make sure to test the new firmware generations in your application, to allow a smooth transition.

For preloaded communication modules comX & netJACK the new versions can be ordered as following variants:

/PNS V4 - PROFINET IO-Device generation V4

/EIS V3 - EthernetIP Adapter generation V3

For consistency the old versions still can be purchased via the existing variants:

/PNS V3 - PROFINET IO-Device generation V3

/EIS - EthernetIP Adapter generation V2

Panel

bgColor	#FFFFFF
titleBGColor	lightgrey
title	Getting Started

Software Installation

cifX Device Driver & Device Driver Toolkit

Install the cifX device driver on your host system to gain access to the cifX card.

→ ...\Driver_&_Toolkit\Device Driver (NXDRV-WIN)\Installation\cifX Device Driver Setup.exe

Or develop your own device driver to gain access to the cifX, comX or netJACK

→ ...\Driver_&_Toolkit\ Driver Toolkit (NXDRV-TKIT)

USB diagnostic driver

Install the USB diagnostic drivers to gain access to comX or netJACK via USB

→ ...\ Driver_&_Toolkit\netX Diagnostics and Remote Access (NXDIAG)\netX10 USB Driver for Windows\V6.0.9.0\setup.exe

→ ...\ Driver_&_Toolkit\netX Diagnostics and Remote Access (NXDIAG)\netX USB CDC Drivers for Windows\netX50_51_52_100_4x000\setup.exe

→ ...\ Driver_&_Toolkit\netX Diagnostics and Remote Access (NXDIAG)\netX USB CDC Drivers for Windows\netX51_52_4000_4100_Dummy\setup.exe

Configuration Tool SYCON.net

Install SYCON.net to load a communication firmware into cifX, comX or netJACK and to set up a network configuration

→ …\Software_&_Tools\Configuration_Software\SYCON.net…

netPROXY Engineering Tool netXStudio

Install netXStudio to create own OPC UA / MQTT objects for comX 51-IOT firmware

→ …\Software_&_Tools\Configuration_Software\netXStudio…

Auxiliary Tool: netHOST

Install netHOST to easily load a communication firmware into cifX, comX or netJACK and to test your configured network communication.

→ …\Software_&_Tools\Tools\netHost…

First Steps

Install the above mentioned software components.
Mount the Hilscher product into the system, e.g. PC or evaluation board.
(Please ensure power supply, host interface access & USB diagnostic access)
Download a firmware from the Product DVD into the Hilscher product using SYCON.net or the auxiliary tool netHOST. (comX and netJACK always come preloaded and this step is only needed for a firmware update)
Set up a network configuration via SYCON.net
Download the configuration into the product and start the communication.
Optional: Check data exchange with “cifXTest” utility, which is installed in the Windows Control Panel and …\Program Files\cifX Device Driver with the cifX Device Driver (NXDRV-WIN). Alternatively you can use the auxiliary tool netHOST.
Connect the application.

Firmware

For full support with the Hilscher tool chain, the minimum firmware listed on this Product DVD has to be used. For the latest version, please visit the Hilscher Knowledge Base regularly.

Documentation

Documentation for all hard- and software components included in this Product DVD is available on the path: …\Documentation\...

The Documentation Library on the Hilscher Knowledgebase includes further documents: https://kbhilscher.hilscheratlassian.comnet/wiki/display/DL/Documentation+Library+Home

Panel

bgColor	#ffffff
titleBGColor	lightgrey
title	Driver & Toolkit

Page Properties Report

hidden	False
firstcolumn	Version
spaces	@all
headings	Component,Release Date, Latest Release
pageSize	40
sortBy	Component
id	Product DVD
label	COMSOL_2017-01-1
cql	label = "comsol_2021-03-1-drv"

Panel

bgColor	#ffffff
titleBGColor	lightgrey
title	Device Driver

Device Driver Windows (NXDRV-WIN)

Operating System	Windows XP		Windows Vista		Windows 7 (KB3033929)		Windows 8/8.1		Windows 10		Windows 10 (Desktop / Secure Boot)		Windows 10 (Server 2019)
Driver Version	V1.0.0.0		V1.0.0.0		V1.0.0.0		V1.2.3.0		V1.3.0.0		V1.3.0.0		V2.5.1.0
Architecture	x86	x64	x86	x64	x86	x64	x86	x64	x86	x64	x86	x86	x86
Status

For other operting systems or toolkit follow the link.

Panel

bgColor	#ffffff
titleBGColor	lightgrey
title	Firmware, EDS, Examples

Page Properties Report

hidden	False
firstcolumn	Version
spaces	@all
headings	Component,Release Date,Certification relevant issues,Latest Release
pageSize	40
sortBy	Component
id	Product DVD
label	COMSOL_2017-01-1-FW
cql	label = "comsol_2021-03-1-fw"

Panel

bgColor	#ffffff
titleBGColor	lightgrey
title	Software & Tools

Page Properties Report

hidden	False
firstcolumn	Version
spaces	@all
headings	Component,Release Date,Latest Release
pageSize	40
sortBy	Component
id	Product DVD
label	COMSOL_2017-01-1-FW
cql	label = "comsol_2021-03-1"

Panel

bgColor	#ffffff
titleBGColor	lightgrey
title	Configuration Tool

SYCON.net

Operating System	Windows 2000	Windows XP SP3	Windows Vista SP2	Windows 7	Windows 8	Windows 8.1	Windows 10
Status

netX Studio Engineering

Operating System	Windows 2000	Windows XP SP3	Windows Vista SP2	Windows 7	Windows 8	Windows 8.1	Windows 10
Status

Panel

bgColor	#ffffff
titleBGColor	lightgrey
title	Documentation

The documentation can be downloaded at:

The Documentation Library
The download section of the current product DVD

Multiexcerpt

MultiExcerptName	CIFX

#fffffflightgreyCIFX Hardware and Protocols

	AS-Interface		CC-Link		CANopen		DeviceNet		PROFIBUS-DP		CC-Link IE Field		CC-Link IE Field Basic		EtherCAT		EtherNet/IP		Modbus/TCP	POWERLINK		PROFINET IO		Sercos		VARAN
	Slave	Master	Slave	Master	Slave	Master	Slave	Master	Slave	Master	Slave	Master	Slave	Master	Slave	Master	Adapter	Scanner	Client/Server	Controlled Node	Managing Node	Device	Controller	Slave	Master	Client	Manager
CIFX 50
CFIX 50E
CIFX 70E
CIFX 80
CIFX 90\F
CIFX 90E\F
CIFX 104
CIFX 104\F
CIFX 104C
CIFX 104C\F

#fffffflightgreyCIFX Hardware Related Product Features

	Systembus	Format	SYNC0/1	2-channel	Detached network interface
CIFX 50	PCI	- - -	¹⁾	³⁾
CIFX 50E	PCI Express	- - -	¹⁾	³⁾
CIFX 70	Low Profile PCI Express	MD1	¹⁾
CIFX 80	Compact PCI	3U	¹⁾
CIFX 90\F	Mini PCI	- - -	¹⁾		⁴⁾
CIFX 90E\F	Mini PCI Express	- - -	²⁾	³⁾	⁴⁾
CIFX 104	PC/104	- - -	¹⁾
CIFX 104\F	PC/104	- - -	¹⁾		⁴⁾
CIFX 104C	PCI-104	- - -	¹⁾
CIFX 104C\F	PCI-104	- - -	¹⁾		⁴⁾

Legend

¹⁾ SYNC0/1 via 3-pin connector

²⁾ SYNC0/1 via system bus

³⁾ For DP, CO and DN only

⁴⁾ Using a Assembly Interface (AIFX) with 15 cm cable

#fffffflightgreyCIFX Firmware Related Product Features

		NDIS via CH1	EoE via CH1
EtherCAT Slave	CIFX-RE
Ethernet/IP Adapter	CIFX-RE
PROFIENT I/O Device	CIFX-RE
sercos Slave	CIFX-RE

#fffffflightgreyCIFX Device Driver Support

	Further Information can be found at ...	Note
C-Toolkit	cifX/netX Toolkit (NXDRV-TKIT)
Windows	Device Driver Windows (NXDRV-WIN)
Windows CE	Device Driver Windows CE (NXDRV-CE)
Linux	Device Driver Linux (NXDRV-LINUX)
QNX	Device Driver QNX (NXDRV-QNX)
VxWorks	Device Driver VxWorks (NXDRV-VxWorks)
InTime	Device Driver INtime (NXDRV-INtime)
IntervalZero RTX®	Device Driver RTX (NXDRV-RTX)
WinAC	Device Driver WinAC (NXDRV-WinAC)
InCoSol OPC DA Server	http://incosol.de/products/hardware/cifx50-dp-profibus-dp-interface?lang=en	Third party OPC DA Server provided by InCoSol GmbH
CODESYS	https://www.codesys.com/products/codesys-fieldbus/industrial-ethernet/profinet.html	Third party device driver and configuator provided by the CODESYS Group

Multiexcerpt

MultiExcerptName	COMX

#fffffflightgreyCOMX Hardware and Protocols

	CC-Link		CANopen		DeviceNET		PROFIBUS-DP		CC-Link IE Field		CC-Link IE Field Basic		EtherCAT		EtherNet/IP		Modbus/TCP	POWERLINK		PROFINET IO		Sercos		VARAN
	Master	Slave	Master	Slave	Master	Slave	Master	Slave	Master	Slave	Master	Slave	Master	Slave	Scanner	Adapter	Client/Server	Managing Node	Controlled Node	Controller	Device	Master	Slave	Manager	Client
COMX 10CA ¹⁾
COMX 10CN ²⁾
COMX 52CA ¹⁾
COMX 52CN ²⁾
COMX 51CA ¹⁾
COMX 51CN ²⁾
COMX 100CA ¹⁾
COMX 100CN ²⁾

Legend

¹⁾ With protocol-specific fieldbus connector on board.

²⁾ Fieldbus interface via pin strip to the base board. Fieldbus connector needs to be implemented on the base board.

³⁾ comX 52 is a compatilble drop-in replacement of comX 10 for fieldbus slave only

#fffffflightgreyCOMX Product Features

		Host interface		Diagnostic interface		SYNC0/1	Slave address switch	Integrated ¹⁾ Webserver (servX)	Raw Ethernet (NDIS)⁶⁾	TCP socket interface ⁶⁾	Integrated OPC UA Server & MQTT Client ⁷⁾
		SPM	DPM	USB	UART	SYNC0/1	Slave address switch	Integrated ¹⁾ Webserver (servX)	Raw Ethernet (NDIS)⁶⁾	TCP socket interface ⁶⁾	Integrated OPC UA Server & MQTT Client ⁷⁾
CC-Link Slave	COMX 52Cx-CCS
CANopen Slave	COMX 52Cx-COS
DeviceNET Slave	COMX 52Cx-DNS
PROFIBUS-DP Slave	COMX 52Cx-DPS
EtherCAT Slave	COMX 51Cx-RE								²⁾
EtherNet/IP Adapter	COMX 51Cx-RE								³⁾	⁵⁾
Modbus/TCP Client/Server	COMX 51Cx-RE
POWERLINK Controlled Node	COMX 51Cx-RE
PROFINET IO Device	COMX 51Cx-RE								³⁾	⁵⁾
Sercos Slave	COMX 51Cx-RE
EtherCAT Master	COMX 100Cx-RE
EtherCAT Slave	COMX 100Cx-RE
EtherNet/IP Scanner	COMX 100Cx-RE
EtherNet/IP Adapter	COMX 100Cx-RE
Modbus/TCP Client/Server	COMX 100Cx-RE
POWERLINK Controlled Node	COMX 100Cx-RE
PROFINET IO Controller	COMX 100Cx-RE
PROFINET IO Device	COMX 100Cx-RE
Sercos Master	COMX 100Cx-RE
Sercos Slave	COMX 100Cx-RE
VARAN Client	COMX 100Cx-RE

Legend

¹⁾ If supported, the integrated WebServer is activated as default. Can be deactivated via Firmware TAG-List.

²⁾ Instead of NDIS EtherCAT supports EoE

³⁾ The NDIS functionality is deactivated as default, but can be activated via Firmware TAG-List.
Real-Time Ethernet will be offered to the host in Channel 0, NDIS and TCP socket in channel 1 and in IoT communication in channel 2.
Channel 1 (NDIS and TCP socket interface) and Channel 2 (IOT communication) can only be accessed in SPM host interface mode. In DPM host interface mode only Channel 0 (RTE) can physically be adressed

⁴⁾ LWIP TCP stack is used, which has a different API (socket API) than the Hilscher TCP stack.

⁵⁾ Hilscher TCP stack is used, which has a different API (HIL TCP API) than LWIP TCP stack.

⁶⁾ NDIS and TCP socket interface can only be accessed in SPM host interface mode, because only Channel 0 can be physically adressed in DPM mode.

⁷⁾ OPC UA Server and MQTT Client can only be accessed in SPM host interface mode, because only Channel 0 can be physically adressed in DPM mode.

Multiexcerpt

MultiExcerptName	NETJACK

#fffffflightgreyNETJACK Hardware and Protocols

	Host interface			CC-Link		CANopen		DeviceNet		PROFIBUS-DP		EtherCAT		EtherNet/IP		Modbus/TCP	POWERLINK		PROFINET IO		Sercos		VARAN
	SPM	DPM	PCIe	Master	Slave	Master	Slave	Master	Slave	Master	Slave	Master	Slave	Scanner	Adapter	Client/Server	Managing Node	Controlled Node	Controller	Device	Master	Slave	Manager	Client
NJ 10D ¹⁾
NJ 51D ¹⁾
NJ 100DN ¹⁾
NJ 100EN ²⁾

Legend

¹⁾ Host interface: Dual-port memory

²⁾ Host Interface: PCI Express

#fffffflightgreyNETJACK Product Features

		Diagnostic interface		SYNC0/1	Slave address switch	Integrated ¹⁾ Webserver (servX)	Raw Ethernet (NDIS)⁶⁾	TCP socket interface ⁶⁾
		USB	UART	SYNC0/1	Slave address switch	Integrated ¹⁾ Webserver (servX)	Raw Ethernet (NDIS)⁶⁾	TCP socket interface ⁶⁾
CC-Link Slave	NJ 10x-CCS
CANopen Slave	NJ 10x-COS
DeviceNET Slave	NJ 10x-DNS
PROFIBUS-DP Slave	NJ 10x-DPS
EtherCAT Slave	NJ 51x-RE
EtherNet/IP Adapter	NJ 51x-RE						³⁾	⁵⁾
Modbus/TCP Client/Server	NJ 51x-RE
POWERLINK Controlled Node	NJ 51x-RE
PROFINET IO Device	NJ 51x-RE						³⁾	⁵⁾
Sercos Slave	NJ 51x-RE
EtherCAT Master	NJ 100x-RE
EtherCAT Slave	NJ 100x-RE
EtherNet/IP Scanner	NJ 100x-RE
EtherNet/IP Adapter	NJ 100x-RE
Modbus/TCP Client/Server	NJ 100x-RE
POWERLINK Controlled Node	NJ 100x-RE
PROFINET IO Controller	NJ 100x-RE
PROFINET IO Device	NJ 100x-RE
Sercos Master	NJ 100x-RE
Sercos Slave	NJ 100x-RE
VARAN Client	NJ 100x-RE

Legend

¹⁾ If supported, the integrated WebServer is activated by default and can be deactivated via firmware TAG list.

²⁾ Instead of NDIS EtherCAT supports EoE

³⁾ The NDIS functionality is deactivated as default, but can be activated via Firmware TAG-List.
Real-Time Ethernet will be offered to the host in Channel 0, NDIS and TCP socket in channel 1 and in IoT communication in channel 2.
Channel 1 (NDIS and TCP socket interface) and Channel 2 (IOT communication) can only be accessed in SPM host interface mode. In DPM host interface mode only Channel 0 (RTE) can physically be adressed

⁴⁾ LWIP TCP stack is used, which has a different API (socket API) than the Hilscher TCP stack.

⁵⁾ Hilscher TCP stack is used, which has a different API (HIL TCP API) than LWIP TCP stack.

⁶⁾ NDIS and TCP socket interface can only be accessed in SPM host interface mode, because only Channel 0 can be physically adressed in DPM mode.

⁷⁾ OPC UA Server and MQTT Client can only be accessed in SPM host interface mode, because only Channel 0 can be physically adressed in DPM mode.

Panel

bgColor	#ffffff
titleBGColor	lightgrey
title	Download

Documentation (~280 MByte): Documentation_Communication_Solutions_DVD_2021-03-1.zip

Driver & Toolkit (~160 MByte): Driver_&_Toolkit_Communication_Solutions_DVD_2021-03-1.zip

Software & Tools (~470 MByte): Software_&_Tools_Communication_Solutions_DVD_2021-03-1.zip

Firmware, EDS, Examples (~30 MByte): Firmware,_EDS,_Examples,_Webpages_Communication_Solutions_DVD_2021-03-1.zip

Full Download (~940 MByte): Documentation_Communication_Solutions_DVD_2021-03-1.zip

Return to overview page ...

Versions Compared

Old Version 10

New Version Current

Key

PNS V3 & EIS V2 phase out

Software Installation