...
start with the setup described in
Getting started: IoT LFW V2.2 example for netX 90 APP
2. Change OPC UA object
Create OPC UA Hello World Variable in the Actuator object
...
Download this these configuration files to the netX90 like in the getting started guide described.
...
Give the PC an IP address like 192.168.0.40. Set with Ethernet Device Configuration Tool the IP 192.168.0.50 at the device.
Start UAexpert project and configurate the device IP address in this project.
netXStudio_PNSV5_NetProxy_simple_V3.0.0.0\Components\cifXApplicationDemoNpx\OPCUA_CONFIG_PORT2\UAexpertProject\NetProxy_simple_UAexpert_config.uap
...
UAexpert is the OPC UA client and connect it to the OPC UA Server on the netX90.
move variable with drag and drop in the data access view window
...
download the new hwc and the changed firmware to the netX90.
Now Terminl the terminal is mapped to the ftdi uart (usb of NXHX90 board), but it is no longer possible to reach the marshaller.
For a new OPC UA configuration it is neccessary to change back this these settings.