These Flashes are Supported* by the netX romloader, 2ndStageLoader and rcX.
| Type | Size | Frequency | Temperature | Housing | comments |
|---|
| Adesto | AT45DB321E |
| SPI | 4 MB | 85MHz | -40...+85 °C | 8P/SOIC,8P/DFN,8P/UBGA |
|
| Macronix | MX25L3235E | QSPI | 4MB | 104MHz | -40...+85 °C | 8P/SOP, 8P/WSON | * requires parameters in 2nd Stage Loader |
| STMicroelektronics | M25PE80 |
| | M45PE80 SPI1 Winbond | W25Q32B | | | | | 50MHz | -40...+85 °C
-40...+105 °C | 8P/PDP, 8P/SOIC, 8PWSON | * Not Recommended For New Design |
| W25Q32F | QSPI | 4 MB | 50MHz | -40...+85 °C | 8P/PDP, 8P/SOIC, 8PWSON | * Not Recommended For New Design |
W25Q64CV | QSPI | 8 MB | 80MHz | -40...+105°C | PDIP, SOIC, WSON, TFBGA |
|
| W25Q32J | QSPI | 4 MB |
| -40...+85 °C |
|
|
Please Note Winbond is working only in 4Bit Mode, if it is connected in normal 1 Bit Mode it won't work!
If Standard netX 52 Firmware from Hilscher is used, we need the Winbond QSPI Quad SPI Flash.
