These Flashes are Supported* by the netX romloader, 2ndStageLoader and rcX.
| Manufacturer | Device | Type | Size | Frequency | Temperature | Housing | comments |
|---|---|---|---|---|---|---|---|
| Adesto | AT45DB321E | SPI | 4 MB | 85MHz | -40...+85 °C | 8P/SOIC,8P/DFN,8P/UBGA | |
| Macronix | MX25L3235E | QSPI | 4MB | 104MHz | -40...+85 °C | 8P/SOP, 8P/WSON | * requires parameters in 2nd Stage Loader |
| STMicroelektronics | M25PE80 | SPI | 1 MB |
| M45PE40 | SPI | 512 KB |
| M45PE80 | SPI | 1 MB |
| Winbond | W25Q32B | QSPI | 4 MB | 50MHz | -40...+85 °C | 8P/PDP, 8P/SOIC, 8PWSON | * Not Recommended For New Design |
| W25Q32F | QSPI | 4 MB | 50MHz | -40...+85 °C | 8P/PDP, 8P/SOIC, 8PWSON | * Not Recommended For New Design | |
W25Q64CV | QSPI | 8 MB | 80MHz | -40...+105°C | PDIP, SOIC, WSON, TFBGA | ||
| W25Q32J | QSPI | 4 MB | -40...+85 °C |
Please Note Winbond is working only in 4Bit Mode, if it is connected in normal 1 Bit Mode it won't work!
If Standard netX 52 Firmware from Hilscher is used, we need the Winbond QSPI Quad SPI Flash.