These Flashes are Supported* by the netX romloader, 2ndStageLoader and rcX.
| Manufacturer | Device | Type | Size | Frequency | Temperature | Housing |
|---|
Comments| comments |
|---|
| Adesto | AT45DB321E | SPI | 4 MB | 85MHz | -40...+85 °C | 8P/SOIC,8P/DFN,8P/UBGA |
SPI| | MX25L12835F | SPI | 16MB | | 16P/SOP | MX25L12835FMI-10G tested with NXHX51ETM, BSL V1.4.17.0 with custom flash parameters set in tag list identical to MX25L3235E except "Chip size=0x01000000" and "ID compare=00 C2 20 18 00 00 00 00 00" |
| | https://kb.hilscher.com/display/EOS/Macronix+M25L3235E | | 104MHz | -40...+85 °C | 8P/SOP, 8P/WSON | * requires parameters in 2nd Stage Loader |
| STMicroelektronics | M25PE80 | SPI | 1 MB |
| | M45PE80SPI1 | | | Winbond | W25Q32B| 50MHz | -40...+85 °C
-40...+105 °C | 8P/PDP, 8P/SOIC, 8PWSON | * Not Recommended For New Design |
| W25Q32F | QSPI | 4 MB | 50MHz | -40...+85 °C | 8P/PDP, 8P/SOIC, 8PWSON | * Not Recommended For New Design |
W25Q64CV | QSPI | 8 MB | 80MHz | -40...+105°C | PDIP, SOIC, WSON, TFBGA |
|
| W25Q32J | QSPI | 4 MB |
| -40...+85 °C |
|
|
Please Note Winbond is working only in 4Bit Mode, if it is connected in normal 1 Bit Mode it won't work!
If Standard netX 52 Firmware from Hilscher is used, we need the Winbond QSPI Quad SPI Flash.
