Page Comparison

Panel

bgColor	#ffffff
title	Q

How to make use of the BOD?

Panel

bgColor	#ffffff
title	A

The basic circuit (source: technical data reference guide) is shown below.

with With the following values:

Symbol	Min	Typ	Max	Unit
BOD	0		3.6	V
BOD_T	1.11	1.14	1.17	V
BOD_H	47	60	73	mV
BOD_P	5		20	μs

The 24V is splitt split up by the resistors R1 and R2. If it will drop drops below 1.14V with an hystresis of 60mV for more than 5μs to 20μs with a hysteresis of 60mV, an internal signal is generated.

The usage of this signal will depend on the kind of power supply that was monitored and how it is available inside the system.

In the netX90 the internal signal is bound to a bit of a register in the asic_ctrl and as an interrupt input of the nested vector interrupt controller (NVIC). The generated interupt interrupt might be used in case that the supervised voltage was the main power supply to finish critical tasks and close non-reentrant contexts.

Panel

bgColor	#ffffff
title	Q

Does the Communication Side make use of the BOD?

Panel

bgColor	#ffffff
title	A

The Communication Side does not use the BOD at the moment.

Panel

bgColor	#ffffff
title	Q

Is there a driver available?

Panel

bgColor	#ffffff
title	A

The peripheral driver package of the netX90 has an integration of the BOD as an input via the DIO drivers.

Code Block

language	cpp
firstline	1
title	Example

#include "netx_drv.h"

void bodcallback(void* pvDriver, void* pvUser){
  __NOP();
}

void bodexample(void) {
  // Attach the BOD callback to the bod signal
  (void) DRV_DIO_ChannelIRQAttach(DRV_DIO_ID_BOD,bodcallback,(void*)0xaa55aa55);
  // Issue the interrupt controller to generate the interrupt for testing purposes
  DRV_NVIC_SetPendingIRQ(DRV_BOD_IRQ);
}

Panel

bgColor	#ffffff
title	See also...

Filter by label (Content by label)

showLabels	false
spaces	@self
showSpace	false
cql	label = "faq" and space = currentSpace ( )
labels	faq

Versions Compared

Old Version 5

New Version Current

Key