General

...

information

The runability of a COMSOL device requires require a loadable firmware (LFW) as well as a suitable configuration by default. The first is provided in a firmware file (.nxf file).

...

Below the root directory, the folder structure is continued according to a specific scheme (see figure).

For each device, a sub-directory subdirectory is created, which depends either on the device ID and serial number or on the slot number set for the device.

...

On other operating systems like Linux, things look a little different. Tools like Sycon.NET are not available for this purpose. The "manual" moving of the files is normal procedure here.

TCP-Server

Sycon.NET can also be used when using a Linux system, by using a TCP server.

This allows the device to be remotely configured. This proceedure procedure requires, that the target device has been recognized by the oposite opposite operating system (Linux) and that the two computers can reach each other via the network.

...

Please find a detailed description of this proceedure procedure here:

How to connect a CIFX Card in a Linux System to Sycon.net via TCP Server

Configuration-Export - copy manually

As an alternative to the TCP server, the required files can also be moved / copied manually to the required subdirectories.

...

All other files need to be cleaned by the just mentioned prefix until the last "_". All files must be stored in the same way as the main file in the Channel # 0 directory.

Configuration via application

A complete renunciation of Sycon.NET is possible with an applicative application configuration via the acyclic interface of the respective protocol API.

...