...
...
| Section |
|---|
| Column |
|---|
| DescriptionThe EtherNet/IP Adapter firmware implements all CIP objects and services to build an EtherNet/IP Adapter device that can pass ODVA's conformance test.
This |
|
...
in addition requires a correctly behaving host application |
|
...
that interfaces to the firmware through the Dual Port Memory (DPM) interface. ConfigurationThe stack can be configured via data base files (generated with Hilscher's Sycon.net or Communication Studio) or via the DPM's mailbox interface (refer to the corresponding API manual).
During connection establishment to an EtherNet/IP Scanner ( |
|
...
PLC), it is possible to pass configuration data to the |
|
...
host application. Implicit Messaging (Cyclic |
|
...
...
Through the DPM the host application has access to the process data that is consumed and produces by the firmware. Explicit Messaging (Acyclic |
|
...
...
received from the network and addressing 'build in' CIP objects (CIP objects that |
|
...
are part of the firmware's default CIP object |
|
...
model) are handled by the firmware itself. |
|
...
There is the possibility to extend the default object model by additional CIP objects, e.g. to support
|
|
...
CIP profiles or vendor specific CIP objects. Key Features |
|
...
| Excerpt |
|---|
- Cyclic I/O data (Implicit Messaging): class 0
|
|
|
...
...
- Acyclic data (Explicit Messaging): Unconnected / Connected (class 3)
- Connection Application Types: Exclusive Owner, Input Only, Listen Only
- Trigger Types: Cyclic, Change of State, Application Triggered
- Device Level Ring (DLR) - Media Redundancy 1)
- Address Conflict Detection (ACD)
- Quality of Service (QoS)
- CIP Sync 1)
- QuickConnect (Fast Startup)
- NULL-ForwardOpen
- CIP Safety "Ready" (provides all necessary features and interfaces to attach a CIP Safety stack on top)
- Firmware built-in CIP Object model can be extended by
|
|
|
...
...
- e.g. to support CIP profiles
|
|
|
...
...
...
- DLR 1)
- DHCP / BOOTP
- IEEE 802.3
- IEEE 802.1Q
- LLDP
- SNMP
- PTP (Precision Time Protocol) 1)
Technical DataThe technical data of the individual available firmwares differ slightly. Therefore, the below table only provides a rough overview of the supported features. | Info |
|---|
Note: For a detailed listing of the technical data, please refer to the data sheet of the individual firmware. You can find them in the "Resources" section on the specific firmware version page. Firmware data sheets are available for version V3.8.0.0 and higher. |
| Feature | Description |
|---|
| Maximum number of input data per assembly instance | 504 bytes | | Maximum number of output data per assembly instance | 504 bytes | Maximum number of assemblies
(firmware dependent) | 10 | | IO Connection Types (implicit) | Exclusive Owner, Listen Only, Input only | | IO Connection Trigger Types | Cyclic, minimum 1 ms*
Application Triggered, minimum 1 ms*
Change Of State, minimum 1 ms* | | Explicit Messages | Connected (class 3) and unconnected | | Unconnected Message Manager (UCMM) | supported | Max. number of connections
(firmware dependent) | Class 0 / Class 1: 5 Class 3: 10 UCMM: 10 | Max. number of user specific objects
(firmware dependent) | 20 | | Predefined standard objects | Identity Object (0x01)
Message Router Object (0x02)
Assembly Object (0x04)
Connection Manager (0x06)
DLR Object (0x47) 1)
QoS Object (0x48)
TCP/IP Interface Object (0xF5)
Ethernet Link Object (0xF6)
LLDP Management Object (0x109)
Time Sync (0x43) 1) | | DHCP | supported | | BOOTP | supported | | Baud rates | 10 and 100 MBit/s | | Duplex modes | Half Duplex, Full Duplex, Auto-Negotiation | | MDI modes | MDI, MDI-X, Auto-MDIX | | Data transport layer | Ethernet II, IEEE 802.3 | | Address Conflict Detection (ACD) | supported | | DLR (ring topology) |
|
|
...
| supported 1) | | Integrated switch |
|
|
...
| supported 1) | | CIP Reset services | Identity Object Reset Service of Type 0 and 1 |
|
|
...
Configuration
Configuration is done by sending packets to the stack or by using SYCON.net configuration database.
Diagnostic
...
1) Supported by 2 port firmware variants only
