Due to the module’s preconfiguration there is no specific knowledge about network commissioning is not required. Just Importing just use the provided netHAT device description files for it and focus on your application and the PLC programming. The module demonstrates in the corresponding PLC's engineering tools is enough to get netHAT configured and operative. Overall netHAT module demonstrates a subset of the capabilities of Hilscher’s Multiprotocol Network Controller netX SoC "netX52" in a very simple manner. Since the netX API remains the same The advantage of netX52 is that independent of the loaded protocol firmware an application needs to be programmed only once and hence supports any Real-Time Ethernet networkthe software interface to its application remains the same - it is a a simple input and output data buffer for communications in both directions. Parameters | Value |
---|
Processor/Network Controller | netX 52 Memorymultiprotocol industrial network SoC | Firmware memory | 4 MB Quad SPI Flash | Communication interface | 2 x RJ45 Ethernet 100 BASE-TX | Provided protocol software (firmware) | PROFINET, EtherCAT, EtherNet/IP as device | Application exchangeable amount of process data | 32 bytes input and 32 bytes of output data | Host interface | SPI up to 125 MHz | DisplaysIndicators | System-LEDSYS LED for module status information COM LED for protocol-specific diagnosisindications | Operating temperature | 0 ... + 50 °C | Operating voltage | +5 V / typ 300 mA | Dimensions (L x W x H) | 65 x 57 x 20 mm | CE marking | yes | RoHS compliant | yes | Compatible with | Raspberry Pi®4, 3, PI®2, Zero® | Module pinput/standard | HAT standard for as defined by RaspberryPi® organization |
Note |
---|
| This product serves for test, educational and teaching purposes in laboratory environments only. It is not made to be used in any productive environments or automation systems. Any liability is excluded with regard to usages within such productive industrial environments! |
|