Page Comparison

These Flashes are Supported* by the netX romloader, 2ndStageLoader and rcX.

Manufacturer	Device	Type	Size	Frequency	Temperature	Housing

Comments

comments
Adesto	AT45DB321E	SPI	4 MB	85MHz	-40...+85 °C	8P/SOIC,8P/DFN,8P/UBGA

 

Macronix

 MX25L3235E

MX25L3235E

SPI/(

QSPI

not yet tested)

4MB

  

https://kb.hilscher.com/display/EOS/Macronix+M25L3235E

  MX25L12835FSPI/(QSPI not yet tested)16MB 16P/SOP

MX25L12835FMI-10G tested with NXHX51ETM with 1bit SPI, BSL V1.4.17.0 with custom flash parameters set in tag list

identical to MX25L3235E except "Chip size=0x01000000" and "ID compare=00 C2 20 18 00 00 00 00 00"; and with EIM2.6.7.1

104MHz	-40...+85 °C	8P/SOP, 8P/WSON	* requires parameters in 2nd Stage Loader
STMicroelektronics	M25PE80	SPI	1 MB

   

M45PE40	SPI	512 KB
M45PE80

 

SPI

 

1 MB

 

Winbond

M45PE80

W25Q32B

SPI

QSPI

1 MB   WinbondW25Q32B

4 MB	50MHz	-40...+85 °C -40...+105 °C	8P/PDP, 8P/SOIC, 8PWSON	* Not Recommended For New Design
W25Q32F	QSPI	4 MB	50MHz	-40...+85 °C	8P/PDP, 8P/SOIC, 8PWSON	* Not Recommended For New Design
W25Q64CV	QSPI	8 MB	80MHz	-40...+105°C	PDIP, SOIC, WSON, TFBGA
W25Q32J	QSPI	4 MB		-40...+85 °C

Please Note Winbond is working only in 4Bit Mode, if it is connected in normal 1 Bit Mode it won't work!

If Standard netX 52 Firmware from Hilscher is used, we need the Winbond QSPI Quad SPI Flash.  is working only with patched 2nd Stage Loader and adapted firmware