Overview The PROFIdrive profile is the tried and tested device profile for drive units based on PROFIBUS and PROFINET. With the application example presented here, you can shorten the development time for realization of a PROFIdrive connection of a drive unit. The application example is based on the PROFINET stack for the EK ERTEC 200P-2 Evaluation Kit. It can also serve as the basis for porting to other platforms and communication stacks.
PROFIdrive is a standardized application interface for drives and encoders and is defined in IEC61800-7 as well as Chinese Recommendatory National Standard GB/T 25740.
| Column |
|---|
| The figure shows an overview: PROFIdrive (green) as the application layer between the PROFINET stack (orange) and the drive application (black) from drive perspective. 
For more details click here ... |
| Column |
|---|
| | Panel |
|---|
| titleBGColor | white |
|---|
| borderStyle | solid |
|---|
| title | Releases |
|---|
| | Filter by label (Content by label) |
|---|
| showLabels | false |
|---|
| showSpace | false |
|---|
| cql | label = "profidrive-device-ac1" |
|---|
|
| Filter by label (Content by label) |
|---|
| showLabels | false |
|---|
| showSpace | false |
|---|
| cql | label = "profidrive-device-ac4" |
|---|
|
|
|
| 