Skip to end of banner
Go to start of banner

netX 51 - Ethernet/IP Adapter - V4.0.0.0

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Release Notes
Status

RELEASE    

Date2021-12-03
HostnetX 51
Protocol

EIS V3.7.0.0

ToolchainnetXSTUDIO CDT V1.0910.1.4842
Description
netX 51 is used as a Host Controller in this case. A netX 51 based hardware like NXHX 51-ETM must be connected to any netX based companion chip which runs the EtherCAT Slave LFW V4. I.e. in this setup 2 netX chips are used: One as host, the second as companion chip.
In most cases, netX 51 will not be used as a host controller. Anyway this example might be helpful for users to understand the usage of ECS V4 stacks.
  • a simple PROFINET configuration example, using SET_CONFIGURATION_REQ packet, without indication handling
  • please refer to the file "README.txt" for further information
  • please refer to the Agreement in "README_DISCLAIMER.txt", provided together with this packet!
Changelog

Restrictions
  • limited tests
Resources

  File Modified
No files shared here yet.


Return to overview page...



  • No labels