Skip to end of banner
Go to start of banner

Supported Flash Types netX51/52

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 17 Current »

These Flashes are Supported* by the netX romloader, 2ndStageLoader and rcX.

ManufacturerDeviceTypeSizeFrequencyTemperatureHousingcomments
AdestoAT45DB321ESPI4 MB85MHz-40...+85 °C8P/SOIC,8P/DFN,8P/UBGA
MacronixMX25L3235EQSPI4MB104MHz-40...+85 °C8P/SOP, 8P/WSON

* requires parameters

STMicroelektronicsM25PE80SPI1 MB   
M45PE40SPI512 KB   
M45PE80SPI1 MB   
Winbond

W25Q32B

QSPI4 MB50MHz

-40...+85 °C
-40...+105 °C

8P/PDP, 8P/SOIC, 8PWSON
W25Q32FQSPI4 MB50MHz-40...+85 °C8P/PDP, 8P/SOIC, 8PWSON

W25Q64CV

QSPI8 MB80MHz-40...+105°CPDIP, SOIC, WSON, TFBGA

Please Note Winbond is working only in 4Bit Mode, if it is connected in normal 1 Bit Mode it won't work!

If Standard netX 52 Firmware from Hilscher is used, we need the Winbond Quad SPI Flash.

 

  • No labels