These Flashes are Supported by the netX romloader, 2ndStageLoader and rcX.
| Manufacturer | Device | Type | Size | Frequency | Housing | Comments |
|---|---|---|---|---|---|---|
| Adesto | AT45DB321E | SPI | 4 MB | 85MHz | 8P/SOIC,8P/DFN,8P/UBGA | |
 Macronix | MX25L3235E | SPI/(QSPI not yet tested) | 4MB | |||
| MX25L12835F | SPI/(QSPI not yet tested) | 16MB | 16P/SOP | MX25L12835FMI-10G tested with NXHX51ETM with 1bit SPI, BSL V1.4.17.0 with custom flash parameters set in tag list identical to MX25L3235E except "Chip size=0x01000000" and "ID compare=00 C2 20 18 00 00 00 00 00"; and with EIM2.6.7.1 | ||
| STMicroelektronics | M25PE80 | SPI | 1 MB | |||
| M45PE40 | SPI | 512 KB | ||||
| M45PE80 | SPI | 1 MB | ||||
| Winbond | W25Q32B | QSPI | 4 MB | 50MHz | 8P/PDP, 8P/SOIC, 8PWSON |
Please Note Winbond is working only in 4Bit Mode, if it is connected in normal 1 Bit Mode it won't work!
If Standard netX 52 Firmware from Hilscher is used, we need the Winbond QSPI Flash.
is working only with patched 2nd Stage Loader and adapted firmware