Skip to end of banner
Go to start of banner

V1.6.0 Flasher CLI

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Release notes summary
Status

RELEASE

Date2019-11-28
Summary
  • netX 90 support via UART, ETH interface
  • netIOL support via JTAG interface
  • netX 90 support for DCC via JTAG
  • netX 4000 support for SD card and eMMC
  • netX 51/52/4000 remove Ethernet support (will be re-added in the future)
  • Speed via JTAG interface increased
  • Device size infomation into detect command added
Availability
Operating systemsWindows 7Windows 10Linux
Status(tick)(tick)

(tick)

FlashInternal flash

External serial flash

External parallel flash

eMMC / SD card
netX 10(error)(tick)(error)(error)
netX 100/500(error)(tick)(tick)(error)
netX 50(error)(tick)(tick)(error)
netX 51/52(error)(tick)(error)(error)
netX 4000 / 4100(error)(tick)(error)(tick)
netX 90(tick)(tick)(error)(error)
netIOL(error)(tick)(error)(error)
netX interfacesJTAGUARTUSBEthernet
netX 10(tick)(tick)(error)(error)
netX 100/500(tick)(tick)(tick)(error)
netX 50(tick)(tick)(tick)(error)
netX 51/52(tick)(tick)(tick)(error)
netX 4000 / 4100(tick)(tick)(tick)(error)
netX 90(tick)(tick)(error)(tick)
netIOL(tick)(error)(error)(error)


Legend

(tick) supported

(error) not available

Changes in this version

type key summary resolution
Refresh

Known issues

type key summary fixversions status resolution
Refresh

Download

  File Modified


Use the USB drivers available under the following link

V2.4.7 USB driver for flasher CLI for Windows

If you are using the NRPEB-SPM hardware, install also the driver available under the following link

V3.0.0.0 (NXUSBFTDI)

Documentation

(warning) NO dedicated documentation for the CLI flasher is availble yet (warning)

Until a separate document for the CLI Flasher is available, see chapter "3.2 How to use the command line flasher" inside the following document, which describes the flasher CLI for the netX 90.

Generating page properties report...

  • No labels