Skip to end of banner
Go to start of banner

USB driver for CLI Flasher (muhkuh framework)

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

Releases

Current release:

For previous versions see version history .


General Information

Features

  • provides an USB driver, which can be used with the muhkuh framework, flasher and netX Studio
  • support for JTAG / UART interface via FTDI chip
  • setup.exe (dpinst32/64) for easy installation
Availability

Supported operating systems

Operating systemsWindows 7Windows 10
Status(tick)(tick)

Supported netX bootloader with USB interface

netX ROM loadernetX 100 / 500netx 50netX 10netX 51 / 52net X 4000 / netX 4100
Status(tick)(tick)(tick)(tick)(tick)
used communication protocol to talk to ROM loadernative USBvirtual COM portnative USBvirtual COM portvirtual COM port

Supported hardware with FTDI - protocol converter

FTDI support

Board / Adapter name

StatusUSB ID of FTDI chipInterface installation
NXHX 90-JTAG(tick)VID_1939_&PID_002C

MI_00 = JTAG

MI_01 = UART

NXHX90-DRIVE(tick)VID_1939_&PID_0031

MI_00 = JTAG

MI_01 = UART

NXHX 500

NXHX 50

NXHX 51

NXHX 52

NXHX 10

(tick)VID_0640_&PID_0028

MI_00 = JTAG


NXJTAG-4000-USB(tick)VID_1939_&PID_0301

MI_00 = JTAG

MI_01 = UART

NXJTAG USB(tick)VID_1939_&PID_0023

MI_00 = JTAG

NRPEB-SPM

(warning) supported by USB driver NXUSBFTDI provided via cifX Toolkit

min driver version is 3.0.0.0

VID_1939_&PID_0029

MI_00 = USB JTAG

MI_01 = USB SPM


Legend

(tick) supported

(error) not available

  • No labels