Description
The EtherNet/IP Adapter firmware implements all CIP objects and services to build an EtherNet/IP Adapter device that can pass ODVA's conformance test. This also requires a correctly behaving host application in addition.
Configuration
The stack can be configured via data base files (generated with Hilscher's Sycon.net or Communication Studio) or via the mailbox interface (refer to the corresponding API manual).
During connection establishment to an EtherNet/IP Scanner (Master) it is possible to pass configuration data to the application. Depending on the configuration data the application can reject the incoming connection.
Implicit Messaging (Cyclic data)
The stack offers an interface to access the cyclic data.
The cyclic data is is available in the dual-port memory (DPM) which can be accessed by a host application.
Explicit Messaging (Acyclic data)
Acyclic services to 'build in' CIP objects (CIP objects that belong to the default CIP object dictionary of the EtherNet/IP Adapter firmware) are handled by the firmware itself.
In addition to the 'build-in' CIP objects other CIP objects or vendor specific CIP objects can be registered at the firmware, e.g. to support special CIP profiles. In that case, all acyclic services need to be handled by the host application.
Key Features
- Device Level Ring (DLR) - Media Redundancy
- Address Conflict Detection (ACD)
- Implicit Messaging: class 0 or class 1
- Explicit Messaging Unconnected / Connected (class 3)
- Connection Application Types: Exclusive Owner, Input Only, Listen Only
- Quality of Service (QoS)
- Object model can be extended by implementing own CIP objects (necessary to support CIP profiles)
- CIP Sync
- QuickConnect (Fast Startup)
- NULL-ForwardOpen
Supported Protocols
- TCP/IP, UDP/IP
- DLR
- DHCP / BOOTP
- IEEE 802.3
- IEEE 802.1Q
- LLDP
- SNMP
Technical Data
| Feature | Description |
|---|---|
| Maximum number of input data per assembly instance | 504 bytes |
| Maximum number of output data per assembly instance | 504 bytes |
| Maximum number of assemblies | 10 |
| IO Connection Types (implicit) | Exclusive Owner, Listen Only, Input only |
| IO Connection Trigger Types | Cyclic, minimum 1 ms* |
| Explicit Messages | Connected and unconnected |
| Unconnected Message Manager (UCMM) | supported |
| Max. number of connections | Class 1: 5 Class 3: 10 UCMM: 10 |
| Max. number of user specific objects | 20 |
| Predefined standard objects | Identity Object (0x01) |
| DHCP | supported |
| BOOTP | supported |
| Baud rates | 10 and 100 MBit/s |
| Duplex modes | Half Duplex, Full Duplex, Auto-Negotiation |
| MDI modes | MDI, MDI-X, Auto-MDIX |
| Data transport layer | Ethernet II, IEEE 802.3 |
| Address Conflict Detection (ACD) | supported |
| DLR (ring topology) | supported |
| Integrated switch | supported |
| CIP Reset services | Identity Object Reset Service of Type 0 and 1 |