Features

• Device selection by name and board number
• All supported devices can be used simultaneously
• Up to four devices possible
• Automatic firmware comparison and download during startup possible
• Automatic configuration comparison and download during startup possible
• Unique device selection of the hardware by serial and device number possible including automatic card replacement detection
• Fieldbus configuration by SyCon, no fieldbus configuration in STEP7 needed
• Slave I/O data are mapped 1:1 into STEP7 data blocks
• I/O data update with hardware processed in back round thread

Limitations

• Only master cards are supported yet
• PCMCIA cards are not supported

For more details click here.

Description

The WinAC Basis implementation is based on the Siemens WinAC ODK by creating a COM while the
WinAC RTX implamentation is based on the WinAC RTX ODK.

For more details click here.