My firewall seems to block communication with netANALYZER. What do I have to consider in my firewall rule set?

If your firewall is blocking TCP or UDP communication you have to consider the NANL-B500G-RE TCP/IP and UDP/IP communication behaviour in your firewall rule set or disable your firewall temporarily while working with the netANALYZER

See also...

Page:

NANL-B500G-RE cannot is not found with multiple IP addresses on one interface
Page:

Installation not working on Windows 8
Page:

Installation of the netANALYZER Scope software hangs
Page:

Ports 2 and 3 do not capture frames anymore
Page:

I measure strange values in timing analysis when using a short cable between the two TAPs
Page:

NANL-B500G-RE capture aborts
Page:

Will NANL-B500E-RE work with USB to ExpressCard adapter?
Page:

What's scope of delivery of 7313.102 NANL-B500G-RE CASE?
Page:

How can NANL-B500E-RE be connected to a desktop PC?
Page:

How to use custom value filters to decode every type of traffic
Page:

I want to use autonomous operation of netANALYZER box NANL-B500G-RE, what licenses are required?
Page:

NANL-B500G-RE is not found in different subnet
Page:

Why is my autonomuos mode USB stick not recognized after restart of NANL-B500G-RE device
Page:

How many snapshot can be stored on the USB memory?
Page:

NXANL 500-RE not working under Windows 7 and above

Browser not supported