Overview netX 500 / 100

Owned by Nico Mäding
2024-04-23
1 min read

SoC Features

netX 500netX 100
Core Processor
ARM® ProcessorARM926J-S at 200 MHz with 2x 8 KB TCM and MMUARM926J-S at 200 MHz with 2x 8 KB TCM and MMU
Memory
Cache16 KB I / 8 KB D L116 KB I / 8 KB D L1
SRAM144 KB144 KB
Mask ROM32 KB32 KB
System
WDC (ARM / xPIC)1 / -1 / -
Timer (ARM / xPIC)2x 32-bit / -2x 32-bit / -
Network
xC Subsystem24 channels3 channels
IEEE 1588 SysTime11
Fast Ethernet PHYDual-port, FX supportDual-port, FX support
Peripheral
UART / SPI / I2C / I2S3 / 1 / 1 / -3 / 1 / 1 / -
USB interfaceHost or Device V1.1Host or Device V1.1

LCD Controller

TFT/STN, up to 16-bit RGB, 640x480 pixel-
PIO / GPIO / MMIOUp to 84 / 16 / -Up to 84 / 16 / -
Mixed Signal
Timer (PWM, IC/OC)16x 32-bit16x 32-bit
ADC SAR (1 Msps)2x 4 channels (10-Bit)2x 4 channels (10-Bit)
Quadrature Encoder2 channels2 channels
Host Interface

Parallel (DPM)

8/16-bit8/16-bit
External Memory
SRAM / NOR / NAND / SDRAM(tick) / (tick) / - / (tick) 16/32-bit)(tick) / (tick) / - / (tick) (16/32-bit)
SD/MMC / SDIOSPI Mode / -SPI Mode / -
Debug
Debug / TraceJTAG / ETMJTAG / ETM
Boundary ScanJTAGJTAG
Electrical
Real-Time Clock (RTC)(tick)(tick)
Power supply3.3 V, 1.5 V3.3 V, 1.5 V

Package dimension

345-pin BGA, 22x22 mm2, 1 mm Ball Pitch345-pin BGA, 22x22 mm2, 1 mm Ball Pitch


Note 2:

  • Channel-based real-time communication interface, which supports all popular Industrial Ethernet and Fieldbus standards
  • List of software protocol stacks by netX Technologies for industrial master or controller and slave or device applications