Lauterbach Debug Controller

LA-3500	DEBUG-USB3	PowerDebug Module USB 3.0 Universal debug controller with USB 3.0 for Windows/Linux/MacOSX applicable for all TRACE32 debug cables requires TRACE32 software DVD 2013/02 or newer

LA-3505

POWER-DEBUG-PRO

PowerDebug PRO Ethernet
Universal debug controller,
1 Gbit Ethernet and
USB 3.0 (Windows/Linux/MacOSX)

Lauterbach debug cable and license for netX 90

netX 90 has internal 2x cortex M4

netX 90 has an external 4bit trace port

LA7844 Debug Cable

To use the standard JTAG debugging features use the following license

LA-7844A

JTAG-CORTEX_M-A

JTAG Debugger License for Cortex-M Add.
supports ARM Cortex-M
trace support ETM Cortex-M via ETB included

please add the base serial number of your debug
cable to your order

Show Programmable Options

Use this license, if it is the first debugger license for that debug cable.

LA-7844X

JTAG-CORTEX_M-X

JTAG Debugger Extension for Cortex-M
supports ARM Cortex-M
trace support ETM Cortex-M via ETB included

requires a valid software guarantee or a valid
software maintenance key

please add the base serial number of your debug
cable to your order

Use this license, if a debug cable with a valid debugger license exists and this feature should be added

To use the trace port you need either

This debug cable with probe should be used with a fast debugging interface. Either USB3.0 or 1GBit Ethernet. It is also possible to use it with the old USB2.0 debugging interfaces, but this may limit the possible trace features.

LA-4502

or

LA-4597

COMBIPROBE-ARM

CombiProbe ARM-Debugger and 4-Bit Trace
Debug cable and 128-MByte of trace memory

Supports Standard-JTAG, cJTAG and
Serial Wire Debug Port

requires at least one of the following A-licenses:
LA-7742A (JTAG Debugger License for ARM9 Add.)
LA-7746A (JTAG Debugger License for ARM7 Add.)
LA-7765A (JTAG Debugger License for ARM11 Add.)
LA-7843A (JTAG Debugger License for CORTEX-A Add.)
LA-7844A (JTAG Debugger License for CORTEX-M Add.)

Trace support (up to 4-bit) included:
- MIPI System Trace
- ITM via Serial Wire Output/TPIU
- ETM Cortex-M continuous mode via TPIU

Supports the following trace licenses:
LA-7970X (Trace License for the ARM Architecture)

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or Power Debug PRO

or

This limits the debbuging to cortexM ONLY.

LA-4530

UTRACE-CORTEX-M

uTrace for Cortex-M
Supports Standard-JTAG and
Serial Wire Debug Port for Cortex-M

includes 256-MByte of trace RAM to support:
- ITM via Serial Wire Output/TPIU
- ETM Cortex-M continuous mode via TPIU (4-bit)

Trace Streaming up to 100 MByte/s:
- requires USB 3.0 (SuperSpeed) capable host computer
- recommended is an Intel 7 Series Express chipset
which has integrated USB 3.0 support

Concurrent debugging of two or more
Cortex-M cores requires a
License for Multicore Debugging (LA-7960X)

Lauterbach Trace license

LA-7970X

TRACE-LICENSE-ARM

Trace License for ARM (Debug Cable)
  Supports for Embedded Trace Buffer (ETB)

  please add the base serial number of your debug
  cable to your order

Show Programmable Options

Converter for existing ETM debugger hardware to connect to netX 90 with MIPI-20

LA-3770

CONV-ARM20/MIPI34

ARM Converter ARM-20 to MIPI-10/20/34
Converter to connect a Debug Cable to 10/20/34 pin
connectors specified by MIPI. Converts to CombiProbe
connector

Adaption

Browser not supported