FAQ - NHAT 52-RE
Recently updated FAQs
- A Raspberry Pi supports multiple SPI signals, which ones are used for communication between RPi and netHAT?
- Can other expansion HAT boards be used in combination with the netHAT?
- Is other protocol fimware than PROFINET, EtherCAT and EtherNet/IP available for netHAT?
- The SYS LED of netHAT flashing alternately yellow and green, is this normal?
- How fast can be the data update cycle with an application running above netHAT?
- Where can I find API documentation about the netHAT supported protocols?
- Where can I find documentation and further information of the netHAT module?
- Is there a 3D CAD model of the netHAT available?
- A netX52 chip could support multiple communication channels at a time, does the netHAT support more than one channel?
- Can I use netHAT with more than 32 bytes inputs or outputs?
See also...
All FAQs
- A netX52 chip could support multiple communication channels at a time, does the netHAT support more than one channel?
- A Raspberry Pi supports multiple SPI signals, which ones are used for communication between RPi and netHAT?
- Can I use netHAT with more than 32 bytes inputs or outputs?
- Can other expansion HAT boards be used in combination with the netHAT?
- How fast can be the data update cycle with an application running above netHAT?
- Is other protocol fimware than PROFINET, EtherCAT and EtherNet/IP available for netHAT?
- Is there a 3D CAD model of the netHAT available?
- The SYS LED of netHAT flashing alternately yellow and green, is this normal?
- Where can I find API documentation about the netHAT supported protocols?
- Where can I find documentation and further information of the netHAT module?
- Which operating systems does the netHAT support?
- Which power supply unit do I require?
- Which SD card size do I require?
- Whom should I contact if I have technical questions relating to the netHAT?