netX 90 - PROFINET IO Device - simpleConfigFOC V3.1.0.0

Owned by
Stefan Neumann
Last updated: 2022-09-12
1 min read
Release Notes
Status

RELEASE

DateEST: 2022-09-12
SummaryExample combining the simple config one with a motion FOC
Toolchain

netXSTUDIO CDT V1.1000.1.5682

Description

Shall be used with the NEW NXHX 90-MC Development Board

  • A simple PROFINET configuration example, using SET_CONFIGURATION_REQ packet, without indication handling
  • Containing also an FOC Example of the motion peripherals.
  • Please refer to the file "README.txt" for further information
  • Please refer to the Agreement in "README_DISCLAIMER.txt", provided together with this packet!
Documentation
Changelog
  • update FOC
Restrictions
  • limited tests
  • contains a limited evaluation firmware
Resources

  File Modified

ZIP Archive netXStudio_PNSV5_simpleConfigFOC V3.1.0.0.zip

2022-09-12 by Stefan Neumann


Return to overview page...