Your introduction into FreeRTOS on the netX 90.

Download

Project Scope

The FreeRTOS Bare example aims to demonstrate FreeRTOS on the netX 90 in the simplest possible way, and contains the following components:

You have therefore access to FreeRTOS features and the netX peripheral drivers.

See section Porting Information if you require information about the link between the individual components.

The following table explains our configuration decisions:

Configuration	Statement
Portable: ARM_CM3	We do not require FPU or MPU
Heap: heap_3	For dynamic allocation
netX_drv: dynamic Mutex	Since we use dynamic allocation

The Bare example consists of two tasks:

uart_send_task: send the next LED state via UART loopback.
uart_receive_task: receives LED state via UART loopback and displays it on the device.

This principle is shown in the diagram below: