Download package IO-Link Wireless Bridge 2022-03-18

For a detailed instruction how to set up your netFIELD Device IO-Link Wireless Bridge, please follow the chapter "Mounting and commissioning" in the User Manual.

→ …\Documentation\User_Manuals\...

Mounting

Mounting without clip

• Plug it onto the IO-Link Device to be connected
• Establish a cable connection from the Wireless Bridge to the IO-Link device

Mounting with clip

• The clip is an easy-to-use retaining bracket to mount the Wireless Bridge to flanges, machines, equipment, and other flat surfaces
• With M3 screws or cable ties it can easily be fixed

Step-by-step instructions for commissioning the bridge

To commission an IO-Link Device in an IO-Link wireless radio network using the Wireless Bridge, perform the following steps:

• Connect the A-coded M12 supply connector of the Wireless Bridge to the power supply using a suitable M12 cable (24 V SELV/PELV power supply required). Make sure that the cable cross-section of the M12 cable is sufficiently large
• The power LED of the Wireless Bridge emits a green light. If this is not the case, check the power supply
• As soon as the Wireless Bridge is connected to the power supply, a reset cycle occurs. This takes a few seconds. During this period, the status LED shows a signal sequence in red, green, and blue
• As soon as the reset cycle is completed, the status LED starts flashing alternately purple and yellow
• Connect the IO-Link Device (sensor/actuator)

• The status LED is flashing alternately purple and green

• Now, you can set up and configure the wireless data transfer of the Wireless Bridge

Documentation

Documentation for all hard- and software components included in this Product DVD is available on the path: …\Documentation\...

The Documentation Library on the Hilscher Knowledgebase includes further documents: https://kb.hilscher.com/display/DL/Documentation+Library+Home

Support

In case of questions, please do not hesitate to get in touch with your local Hilscher Support.       

E-Mail: support@hilscher.com

Phone: +49 6190 9907 99