Release Notes
Description
netX 51 is used as a Host Controller in this case. A netX 51 based hardware like NXHX 51-ETM must be connected to any netX based companion chip which runs the EtherCAT Slave LFW V4. I.e. in this setup 2 netX chips are used: One as host, the second as companion chip.
In most cases, netX 51 will not be used as a host controller. Anyway this example might be helpful for users to understand the usage of ECS V4 stacks.
In most cases, netX 51 will not be used as a host controller. Anyway this example might be helpful for users to understand the usage of ECS V4 stacks.
- a simple PROFINET configuration example, using SET_CONFIGURATION_REQ packet, without indication handling
- please refer to the file "README.txt" for further information
- please refer to the Agreement in "README_DISCLAIMER.txt", provided together with this packet!
Changelog
Restrictions
- limited tests
Resources
Return to overview page...