Your introduction into FreeRTOS on the netX 90.
Download
TBD
Project Scope
The FreeRTOS Bare example aims to demonstrate FreeRTOS on the netX 90 in the simplest possible way, and contains the following components:
- CMSIS
- FreeRTOS
- netx_drv
You have therefore access to FreeRTOS features and the netX peripheral drivers.
See section Porting Information if you require information about the link between the individual components.
Used configuration
The following table explains our configuration decisions:
| Configuration | Statement |
|---|---|
| Portable: ARM_CM3 | We do not require FPU or MPU |
| Heap: heap_3 | For dynamic allocation |
| netX_drv: dynamic Mutex | Since we use dynamic allocation |
Execution of the Bare Example
The Bare example consists of two tasks:
- uart_send_task: send the next LED state via UART loopback.
- uart_receive_task: receives LED state via UART loopback and displays it on the device.
This principle is shown in the diagram below:
