Skip to end of banner
Go to start of banner

What information is checked by the Firmware validation process

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

The firmware validation process is described in the "2nd Stage Boot Loader" manual (see Revision 17 / Chapter 4.4.).

Firmware Validation Points:

  • Manufacturer
  • DeviceClass
  • HwCompatibility
  • HwOptions
  • NXF Header (CRC / File header structure version).
  • XIP firmwaren (ulApplicationLoadAddress on predefined SQI FLASH address)

Boot Error Information

e



  • No labels