Key Features

Command line interface
Supported console mode interfaces: UART, USB
Supported console mode interface Ethernet for local limited network
Support for JTAG interface
All netX SoC are supported
Read / write / erase and verify commands supported
Internal Flash of netX 90 is supported
External serial Flash at SQI interface is supported
External parallel Flash is supported
eMMC / SDcards at SDIO interface of netX 4000 are supported
- Support limited to bare metal, NO support for file transfer into a file systems at eMMC / SD cards
Support for Windows and Linux

Side effects of CLI Flasher command "flash"

Implicit erase

The flash command implemented in the CLI Flasher checks, if the area is erased, before it starts the flash process. If it is not erased, than a block erase (4kByte) is executed before the flash process. This behavoiur may destroy data around the written data.

Alignment

The start offset for a netX 90 internal flashes has to be 16bytes aligned, because of the by default enabled internal ECC protection for the internal flash area.

Recommended

Limit the start offset for any flash command to the 4kByte boundary.

On this page

Browser not supported