Step | Descrition |
---|
Requirements and preparation | - Prepare the device installation and commissioning according to the requirements descriptions on hardware, system and software.
- Prepare the required mounting tools.
| Safety | - Read the mounting instructions and the safety instructions on connecting and commissioning the device.
- Disconnect the system to which the device will be mounted from the power supply.
| Mounting | - Mark the positions to fasten the device with screws and cut the M4 holes.
- Fasten the device with the screws.
- Ground the device.
- Mount all three SMA antennas.
| Connecting and booting | - Connect the Ethernet M12 cable to the NFD-3090-EIS-IOLM\W device and to the PLC (EtherNet/IP Scanner).
- Connect the +24 V DC SELV or PELV power supply to the NFD-3090-EIS-IOLM\W device.
- Connect the +24 V DC SELV or PELV power supply to the sensor/actuator.
- Switch on the power supply units of the device and of the sensors/actuators.
| Commissioning PROFINET IO Device | - Configure the PROFINET IO-Controller: Import the GSDML file:
GSDML-V2.35-HILSCHER-NETFIELD-WIRELESS-20200624.xml This file is to be used if settings of the „Wireless Master Parameters“ are made using the configuration software of the PROFINET IO-Controller. GSDML-V2.35-HILSCHER-NETFIELD-WIRELESS-NOCONFIG-20200624.xml This file is to be used if settings of the „Wireless Master Parameters“ are made using the netFIELD Web Server. - Create the configuration project with PROFINET IO-Controller and PROFINET IO-Device, select the modules and submodules and set the parameters.
- Configure the IO-Link Wireless Master NFD-3090-PNS-IOLM\W using the Web Server.
- Configure the port parameters via the PROFINET IO-Controller or using the Web Server.
- Configure the IO-Link sensors/actuators.
| Commissioning EtherNet/IP Adapter | - For the first commissioning, the NFD-3090-EIS-IOLM\W device requires a DHCP server.
- Configure the EtherNet/IP Scanner: Import the EDS file:
HILSCHER_NETFIELD_V1.1_IOL_W.EDS - Create the configuration project with EtherNet/IP Scanner and EtherNet/IP Adapter, select the connection and set the parameters.
- Configure the IO-Link Wireless Master NFD-3090-EIS-IOLM\W using the Web Server.
- Configure the port parameters via the EtherNet/IP Scanner or using the Web Server.
- Configure the IO-Link sensors/actuators.
|
DocumentationDocumentation for all hard- and software components included in this Product DVD is available on the path: …\Documentation\... The Documentation Library on the Hilscher Knowledgebase includes further documents: https://kb.hilscher.com/display/DL/Documentation+Library+Home SupportIn case of questions, please do not hesitate to get in touch with your local Hilscher Support. E-Mail: support@hilscher.com Phone: +49 6190 9907 99 |