First BETA Version for evaluation purposeRelease with support of PROFINET IO Device, EtherNet/IP Adapter including OPC-UA Server and MQTT Client
Note: We reserve the right to make technical changes without prior notice.
Panel
bgColor
#ffffff
titleBGColor
lightgrey
title
netFIELD Device IO-Link Wireless Master - Business Model
Section
Column
width
50%
Direct Selling - Preloaded communication module
The Device is sold as a product directly by Hilscher Gesellschaft für Systemautomation mbH.
Part number
Product Name
Scope of Delivery
Sales Price / €
1912.102
netFIELD IO-Link Wireless Master - Direct Selling
NFD-3090-PNS-IOLM\W
Antennas
Product DVD
Access to KB Product Area
698,-
1912.122
netFIELD IO-Link Wireless Master - Direct Selling
NFD-3090-EIS-IOLM\W
Column
width
50%
Standalone Solution - Programming platform like a netX90 chip
BRAND LABELING
IP67 MODULE BRANDING
• brand labeling first IP67 module
incl. housing
• fixed functionality, board lineout
& connectors
• brand labeling module firmware
• production of IP67 device at Hilscher
Panel
bgColor
#FFFFFF
titleBGColor
lightgrey
title
Getting Started
Step
Descrition
Requirements and preparation
Prepare the device installation and commissioning according to the requirements descriptions on hardware, system and software.
Prepare the required mounting tools.
Safety
Read the mounting instructions and the safety instructions on connecting and commissioning the device.
Disconnect the system to which the device will be mounted from the power supply.
Mounting
Mark the positions to fasten the device with screws and cut the M4 holes.
Fasten the device with the screws.
Ground the device.
Mount all three SMA antennas.
Connecting and booting
Connect the Ethernet M12 cable to the NFD-3090-EIS-IOLM\W device and to the PLC (EtherNet/IP Scanner).
Connect the +24 V DC SELV or PELV power supply to the NFD-3090-EIS-IOLM\W device.
Connect the +24 V DC SELV or PELV power supply to the sensor/actuator.
Switch on the power supply units of the device and of the sensors/actuators.
Commissioning PROFINET IO Device
Configure the PROFINET IO-Controller: Import the GSDML file: GSDML-V2.35-HILSCHER-NETFIELD-WIRELESS-20200624.xml This file is to be used if settings of the „Wireless Master Parameters“ are made using the configuration software of the PROFINET IO-Controller. GSDML-V2.35-HILSCHER-NETFIELD-WIRELESS-NOCONFIG-20200624.xml This file is to be used if settings of the „Wireless Master Parameters“ are made using the netFIELD Web Server.
Create the configuration project with PROFINET IO-Controller and PROFINET IO-Device, select the modules and submodules and set the parameters.
Configure the IO-Link Wireless Master NFD-3090-PNS-IOLM\W using the Web Server.
Configure the port parameters via the PROFINET IO-Controller or using the Web Server.
Configure the IO-Link sensors/actuators.
Commissioning EtherNet/IP Adapter
For the first commissioning, the NFD-3090-EIS-IOLM\W device requires a DHCP server.
Configure the EtherNet/IP Scanner: Import the EDS file: HILSCHER_NETFIELD_V1.1_IOL_W.EDS
Create the configuration project with EtherNet/IP Scanner and EtherNet/IP Adapter, select the connection and set the parameters.
Configure the IO-Link Wireless Master NFD-3090-EIS-IOLM\W using the Web Server.
Configure the port parameters via the EtherNet/IP Scanner or using the Web Server.