...
The Assemblys Member informations can be read as follows:
| Member Size | Member Reference | |
|---|---|---|
| First Member | 16 | Param121 |
| Second Member | 16 | empty |
The field of the first Member indicated, that it has a data length of 16 bit. It also has a Reference to Param121.
...
Go back the definition of Assem124, the Second Member has a length of 16 and has no Reference entry. This means, all data are defined with value 0.
| Member Size | Member Reference | Data (Hex) | Swap | |
|---|---|---|---|---|
| First Member | 16 | Param101 | 01 00 | 01 00 |
| Second Member | 16 | empty | 00 00 | 00 00 |
| Total | 01 00 00 00 |
Configure cfg. #2 data segment
...
When analyzing all Members and Parameters, the following table can be created:
| Member | Member Size | Member Reference | Data (Hex) | Swap |
|---|---|---|---|---|
| 1 | 1 | Param43 | 03 E8 | E8 03 |
| 2 | 1 | Param45 | 03 E8 | E8 03 |
| 3 | 1 | Param47 | 03 E8 | E8 03 |
| 4 | 1 | Param49 | 03 E8 | E8 03 |
| 5 | 1 | Param51 | 03 E8 | E8 03 |
| 6 | 1 | Param53 | 03 E8 | E8 03 |
| 7 | 1 | Param55 | 03 E8 | E8 03 |
| 8 |
| 1 | Param57 | 03 E8 | E8 03 | |
| 9 |
| 1 | Param44 | 03 E8 | E8 03 |
| 10 |
| 1 | Param46 | 03 E8 | E8 03 |
| 11 |
| 1 | Param48 | 03 E8 | E8 03 | |
| 12 | 16 | Param50 | 03 E8 | E8 03 |
| 13 | 16 | Param52 | 03 E8 | E8 03 |
| 14 | 16 | Param54 | 03 E8 | E8 03 |
| 15 | 16 | Param56 | 03 E8 | E8 03 |
| 16 | 16 | Param58 | 03 E8 | E8 03 |
Therefore the cfg #2 data segment results in:
...