| Table of Contents |
|---|
Introduction
This Getting Started guide, is based on the ComSol_90_4x00 DVD.
All mentioned software and Directorys can be found on this DVD.
It describes how to Install all needed Software and gives a short overview about the configuration steps for Communication Solution Devices (e.g. CIFX Cards).
Software Installation
cifX Device Driver
Install the cifX CIFX device driver for Windows on your host system.
It is needed to gain access to the cifX card via PCI Express.
DVD Path → ...\Driver_&_Toolkit\Device Driver (NXDRV-WIN)\Installation\cifX Device Driver Setup.exe
The newest version of the CIFX Device Driver, is also available on our Knowledge Base:
https://kb.hilscher.com/pages/viewpage.action?pageId=22808096
Device Explorer
Install the Device Explorer, which is used to load download a communication firmware into to the cifX CIFX card.
DVD Path → …\Software_&_Tools\Configuration_Software\Device_Explorer…Explorer Vxxx Setup.exe
The newest version of the Device Explorer, is also available on our Knowledge Base:
https://kb.hilscher.com/display/HWMAN/Device+Explorer
Device Library
Install the Device Library which .
It provides a collection of device and communication DTMs for the Configuration Software Communication Studio.
DVD Path → …\Software_&_Tools\Configuration_Software\Device_Library…Library Vxxx Setup.exe
The newest version of the Device Library, is also available on our Knowledge Base:
https://kb.hilscher.com/display/DEVLIB/Device+Library
Communication Studio
Install the Communication Studio, which is used to set up a network configuration.
DVD Path → …\Software_&_Tools\Configuration_Software\CommunicationStudio…CommunicationStudio Vxxx Setup.exe
The newest version of Communication Studio, is also available on our Knowledge Base:
https://kb.hilscher.com/display/COMSTUDIO/Communication+Studio
First Steps
1. Install the above mentioned software components.
2. Mount the Hilscher product into the system.
3. Download a firmware into the Hilscher product via Device Explorer.
4. Set up a network configuration with E/A data via Communication Studio.
5. Download the configuration into the product and start the communication.
6. Optional: Check data exchange with “cifXTest” utility, which is installed in the Windows Control Panel with the cifX Device Driver (NXDRV-WIN).
7. Connect the application.
...