...
When installing the Software, the installer asks for a Firmware folder.
The
Firmwarefolder selected, must not be saved in the destination folder (If the netX Configuration Tool has been installed before, a fitting folder could be available in the following path:
Programme (x86)\Hilscher GmbH\netX Configuration Tool V1.0900).This Folder may already excist in case
The Firmwarefolder needs to have the following structure:
Firmware\netIC\
The folder needs to be filled with the Firmware you need to use. Otherwise the netX Configuration Tool has been will not be installed before.If the folder already excisting is selected, the following error message appears:
Where to get firmware
netIC Firmware is available for download on our Knowledge Base: https://kb.hilscher.com/display/FWNIC/netIC+Firmware