Key Features- Cyclic I/O data (Implicit Messaging): class 0 / class 1
- Acyclic data (Explicit Messaging): Unconnected / Connected (class 3)
- Connection Application Types: Exclusive Owner, Input Only, Listen Only
- Trigger Types: Cyclic, Change of State, Application Triggered
- Device Level Ring (DLR) - Media Redundancy
- Address Conflict Detection (ACD)
- Quality of Service (QoS)
- CIP Sync
- QuickConnect (Fast Startup)
- NULL-ForwardOpen
- CIP Safety "Ready" (provides all necessary features and interfaces to attach a CIP Safety stack on top)
- Firmware built-in CIP Object model can be extended by additional CIP objects (e.g. to support CIP profiles)
Supported Protocols- TCP/IP, UDP/IP
- DLR
- DHCP / BOOTP
- IEEE 802.3
- IEEE 802.1Q
- LLDP
- SNMP
Technical DataThe technical data of the individual available firmwares differ slightly. Therefore, the below table only provides a rough overview of the supported features.
For a detailed listing of the technical data, please refer to the data sheet of the firmware. Note: Firmware data sheets are available for version V3.8.0.0 and higher. You can find them in the "Resources" section.
| Feature | Description |
|---|
| Maximum number of input data per assembly instance | 504 bytes | | Maximum number of output data per assembly instance | 504 bytes | Maximum number of assemblies
(firmware dependent) | 10 | | IO Connection Types (implicit) | Exclusive Owner, Listen Only, Input only | | IO Connection Trigger Types | Cyclic, minimum 1 ms*
Application Triggered, minimum 1 ms*
Change Of State, minimum 1 ms* | | Explicit Messages | Connected (class 3) and unconnected | | Unconnected Message Manager (UCMM) | supported | Max. number of connections
(firmware dependent) | Class 1: 5 Class 3: 10 UCMM: 10 | Max. number of user specific objects
(firmware dependent) | 20 | | Predefined standard objects | Identity Object (0x01)
Message Router Object (0x02)
Assembly Object (0x04)
Connection Manager (0x06)
DLR Object (0x47)
QoS Object (0x48)
TCP/IP Interface Object (0xF5)
Ethernet Link Object (0xF6)
LLDP Management Object (0x109)
Time Sync (0x43) | | DHCP | supported | | BOOTP | supported | | Baud rates | 10 and 100 MBit/s | | Duplex modes | Half Duplex, Full Duplex, Auto-Negotiation | | MDI modes | MDI, MDI-X, Auto-MDIX | | Data transport layer | Ethernet II, IEEE 802.3 | | Address Conflict Detection (ACD) | supported | | DLR (ring topology) | supported | | Integrated switch | supported | | CIP Reset services | Identity Object Reset Service of Type 0 and 1 |
|