Page Comparison

I want to update the firmware of my netANALYZER NANL-B500G-RE device. How can I do this?

1. Open the Ethernet Device Configuration utiliy
2. Scan for devices
3. Obtain the IP address of the netANALYZER you want to update
   Image RemovedImage Added
4. Open the Windows explorer (alternatively a common FTP utility may be used)
5. Enter ftp://192.168.1.1, where the IP address shall be given with the address obtained from step 3
6. On the login screen enter "update" as user name and "nanl-b500g-re" as password (without the double quotes)
   Image RemovedImage Added
7. Copy the incremental firmware update file to the netANALYZER's FTP target by drag'n'drop the file nanl-b500g-re.update
   The .update file can be found on the netANALYZER DVD in the folder NANL-B500G-RE firmware update
   Image RemovedImage Added
8. Once the file is copied the FTP folder should contain the file nanl-b500g-re.update, there may exist a file update.log from a previous update process, the log file can be ignored
   Image RemovedImage Added
9. Power off your NANL-B500G-RE device
10. Power on your NANL-B500G-RE device and wait until the device is fully operational (SYS LED = green, STA0 LED = red, STA1 LED = off)
11. The device is now updated
12. To verify if the update process was successfully you may verify the version information, open the netANALYZER application and select your device
    Image RemovedImage Added
13. Open the Info dialog box
    Image RemovedImage Added
14. The firmware versions of your NANL-B500G-RE device should now be on the new state
    Image RemovedImage Added