netANALYZER and netANALYZER Scope

The netANALYZER product family runs through a periodical system test. Usually this will be done with the release of a new product DVD, which contains firmware, device driver, analysis tool, auxiliary tools and documentation. The comprehensive tests will ensure an optimal interaction between all components and results in a fixed assignment between latest hardware, firmware, device driver and software tools.

If you are using a different combination and you are facing problems, please contact your local distributor or Hilscher support.

Current release:

• Page:
  netANALYZER Scope DVD 2019-06-1 —

  Download link	netANALYZER_Scope_DVD_2019-06-1.zip
  Status	RLEASED

For previous versions see: netANALYZER Scope DVD version history

	AS-Interface	CC-Link	CANopen	DeviceNet	PROFIBUS-DP	EtherCAT	EtherNet/IP	Mechatrolink III	Modbus/TCP	POWERLINK	PROFINET IO	Sercos	VARAN
netANALYZER
netANALYZER Scope

: not supported, : supported, but requires manual configuration, : fully supported

	Frame capture	Timing analysis	Network load analysis	Process data decoding	Network quicktester (device list, network conversations, network events)	Triggering	Recording without PC of complete frames traffic	Recording without PC of frame snapshots on trigger events	Import capture files from third party tools
netANALYZER without netANALYZER Scope
required netANALYZER license	none	none	none	none	none	none	LIC/NANL/SA	none	none
netANALYZER with netANALYZER Scope
required netANALYZER Scope license	LIC/SCPBS	LIC/SCPBS	LIC/SCPBS	always: LIC/SCPBS PROFINET: LIC/SCP/PN EtherCAT: LIC/SCP/ECAT EtherNet/IP: LIC/SCP/EIP Custom protocols: LIC/SCP/CVF	always: LIC/SCPBS PROFINET: LIC/SCP/QTPN EtherCAT: not available EtherNet/IP: not available	LIC/SCPBS	LIC/NANL/SA	LIC/SCPBS LIC/NANL/SA	LIC/SCPBS LIC/SCP/PCAP

: not supported, : supported with limits, : fully supported

The documentation can be found on the product DVD.

Additionally the FAQ page contains may useful information.