Network Interface | Console Interface | UART | |
Real-time Ethernet | DUAL PHY | ||
PHY0 | Disabled | ||
Fieldbus | XM0 | Disabled | |
Host Interface | SPM | SPM0 | |
Application Peripherals | SQI | SQI0_B_SPI | |
SQI0_B_SQI | |||
SQI1 | |||
MMIO | MMIO0 | ||
MMIO1 | |||
MMIO2 | |||
MMIO3 | |||
MMIO4 | |||
MMIO5 | |||
MMIO6 | |||
MMIO7 | |||
MMIO8 | |||
MMIO9 | |||
MMIO10 | |||
MMIO11 | |||
MMIO12 | |||
MMIO13 | |||
MMIO14 | |||
MMIO15 | |||
MMIO16 | |||
MMIO17 | |||
IO Link | IO_Link0 | ||
IO_Link1 | |||
MLED | MLED4 | ||
MLED5 | |||
MLED6 | |||
MLED7 | |||
MLED8 | |||
MLED9 | |||
MLED10 | |||
MLED11 | |||
PIO | PIO_APP0 | ||
PIO_APP10 | |||
PIO_APP12 | |||
PIO_APP17 | |||
PIO_APP18 | |||
PIO_APP20 | |||
PIO_APP21 | |||
PIO_APP22 | |||
PIO_APP23 | |||
PIO_APP27 | |||
BiSS | BiSS0 | ||
BiSS1 | |||
EnDat | EnDat0 | ||
EnDat1 | |||
ADC | ADC0_IN0 | ||
ADC0_IN1 | |||
ADC1_IN0 | |||
ADC1_IN1 | |||
ADC2_IN0 | |||
ADC2_IN1 | |||
ADC2_IN7 | |||
ADC3_IN0 | |||
ADC3_IN1 | |||
ADC3_IN2 | |||
ADC3_IN3 |
Shared signals
As you might have noticed, some signals are shared, so that they cannot be selected at the same time. The following table shows the dependencies between the signals:
netX 90 Pins, that cannot be selected by NRP H90 Status colour Red title RED
netX 90 Pins, that can be selected by NRP H90 Status colour Yellow title YELLOW
netX 90 Pins, that are recommended by NRP H90 Design-in guide Status colour Green title GREEN
netX 90 Pins, that are not selectable and therefore also NRP H90 pins Status title GREY
Excel | ||
---|---|---|
|