Versions Compared

Old Version 10

changes.mady.by.user Former user

Saved on

compared with

New Version 11

changes.mady.by.user Maher Azarkan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Use the lable "OUT" for Port 1 together with Lable "LINK/ACTIVITY" or "LINK/ACT" or "L/A" or "LA" and Green LED  (Yellow LED is not used for EtherCAT) The lable need to be close to Port1 or obviously allocated to Port1

According to the EPSG 301 Specification, "each POWERLINK node shall support either 2 LEDS (red ERROR LED and green STATUS LED) or a combination of both using one bicolor (green/red) LED called S/E LED".

The Hilscher LFW uses the netX COM0_Green LED as STATUS LED and the netX COM1_Red LED as ERROR LED. The COM0_Red and COM1_Green LEDs are switched off by the firmware.

PROFIBUS