...
| Feature | Description | |
|---|---|---|
Firmware/stack available for netX | netX50, netX100, netX500 | Maximum netX 50, netX 51, netX 52, netX 100, netX 500 |
netX 50, netX 51, netX 52: Max. number of cyclic input data (Tx) of all slaves | 200 254 bytes (including Connection Control and IO Status) | |
| Maximum netX 50, netX 51, netX 52: Max. number of cyclic output data (Rx) of all slaves | 200 254 bytes (including Connection Control and IO Control) | |
| netX 100, netX 500: Maximum number of slave devices (netX 50)8cyclic input data (Tx) of all slaves | 128 bytes (including Connection Control and IO Status) | |
| netX 100, netX 500: Maximum number of cyclic output data (Rx) of all slaves | 128 bytes (including Connection Control and IO Control) | |
Maximum number of slave devices (netX100, netX500)5 | netX 52: 1 All others: 8 | |
Maximum number of applicable SERCOS addresses | 512 (1 … 511) | |
Minimum cycle time | 250 µs | |
Topology | Line and ring | |
Communication phases | NRT, CP0, CP1, CP2, CP3, CP4 | |
Acyclic Communication (Service Channel) | Read/Write/Standard Commands | |
Baud rate | 100 MBit/s | |
Data transport layer | Ethernet II, IEEE 802.3 | |
Supported SERCOS III version | Communication Specification Version 1.1.2 | |
Supported SERCOS Communication Profiles | SCP_FixCFG Version 1.1.1 SCP_VarCFG Version 1.1.1 SCP_VarCFG Version 1.1.3 | |
Supported User SCP Profiles | SCP_WD Version 1.1.1 SCP_Diag Version 1.1.1 SCP_RTB Version 1.1.1 SCP_Mux Version 1.1.1 SCP_Sig 1.1.1 | |
Supported FSP profiles | FSP_IO FSP_Drive | |
SCP Sync support | yes | |
SCP_NRT support | yes | |
| S/IP support | yes | |
Identification LED feature supported | yes | |
Storage location of object dictionary | mixed mode |
...